Micro-hite 900 650 350  



14"Model ±0.00014"±0.00030 mm
24"Model ±0.00018"±0.00040 mm
36"Model ±0.0002"±0.00045 mm

±2s =0.0001"0.003mm

Maximum Perpendicularity Error
14"Model 0.00024"0.006mm
24"Model 0.00032"0.008mm
36"Model 0.00048"0.012mm

Digit Display
Type:Liquid Crystal Display (LCD)

Measuring Head
Max.Displacement Speed:10"/sec (250mm/sec)
Probe Displacement:±0.315"(±8mm)

Measuring System
Opto-electronic sensor precision glass scale

Gage Movement
Air cushion movement for easy,precise positioning

Battery Packs
For continuous operation,one battery pack supplies full-shift power while the second set is being recharged.Batteries may be recharged on or off-line

Dynamic Probes
Trigger-switch probe mechanism for “on-the-fly ” bidirectional measurements



Payment Options:

Open account application!

Wire Transfers: 2% discount

Shopping Cart, only for Paypal or Credit Cards ! 





* NOTE: You must order a control panel see below




 State-of-the-art concept associated  with a high-quality design is the fruit of 20 years of

  experience in the manufacture of electronic height gages.  


• Ideal for inspection job close to the production. No cumbersome cables to clutter up the working


• Fast, simple and reliable probing of the work piece and the bores,

• 3 main instruments available with either a 365, 615 or 920 mm measuring span.

• Numerical display to 0.0005, 0.001, 0.01 and 0.1 mm. 0.000020"/ 0.0005 mm

• Extremely accurate measuring of deviations from length, straightness and perpendicularity due to

   the automatic correction of the bias errors through CAA (Computer Aided Accuracy).

   Coefficient of linear expansion identical to steel (11.5 x 10 -6 K-1).

• “POWER PANEL” for value processing and output with interactive display to guide the


• No manual calculation.

• 99 workpiece-oriented measurement cycles, programmable. Each cycle includes a number of 

  64 features with related limits of size. Built-in printer for result output or possible use of an

  external unit to get a hard copy in A4 format.

• RS-232 data output.

• Every height gage comes with a SCS calibration certificate.

• Free Master Piece for determining probe constant included with every MICRO-HITE unit.



          *NOTE: You must order a control panel for the above


Payment Options:

Open account application!

Wire Transfers: 2% discount

Shopping Cart, only for Paypal or Credit Cards ! 


Power Panel


Control Panel for MICRO-HITE® 350 / 600 /900 with built in Printer

        TESA Control Panel “POWER PANEL”

With dedicated program for measuring in 1 and 2 coordinate

directions with geometric combination of the measured values.

Lets you also measure perpendicularity, straightness and

squareness. Provides 99 workpiece-oriented measurement cycles,

including 64 features with related limits of size, programmable.

Memory capacity for 2500 measured values. Statistical value

processing (SPC). Result output via the built-in matrix printer or

in A4 format using an external unit. PCMCIA memory card reader

enabling measurement cycles and results to be stored. Operator controlled

                                    on-screen display.  .00002 / .0001 / .001 / 0.01 and 0.1 in

                                     0.0005 / 0.001 / 0.01 and 0.1 mm







Official PayPal Seal




Open Account

Wire Transfers